- Details
- Written by: admin
- Category: Uncategorised
- Hits: 403

Brand New TCS Manufacturingtm Products
TCS Manufacturingtm AR Barrel Extension Lug Recess Cleaning Tool
The AR-15, Ar-10 or Modern Sporting Rifle, is one of the finest firearms ever made. Still, it is difficult to clean without the right tools. Until now, you have never the right tool, because we just invented it. This revolutionary new tool is the only tool on the market that allows you to clean the barrel extension lug recess on an AR-15 or an AR-10. Use TCS Tactical Cleaning Solvent and TCS Shotgun patches with this Tool. This tool also works well for most bolt action rifles.
TCS Manufacturingtm Shotgun Bore Guides
If you have ever cleaned a rifle, you know how important a bore guide is. A bore guide helps keep your rod aligned with the bore. It protects your rod, your bore and your chamber. For far too long, no one has made a Shotgun Chamber Guide, until now. If you need to clean a shotgun, with removable barrels, then you need the Revolutionary New TCS Manufacturing Shotgun Chamber Guide. Excellent for both smooth bore and rifled shotgun barrels.
TCS Manufacturingtm 12 Ga Shotgun Bore Guide
TCS Manufacturingtm 20 Ga Shotgun Bore Guide
TCS Manufacturingtm .20 Caliber Jags Are now Available.
20 Caliber Jags fit 204 ruger, 5mm Rimfire, 5mm Craig, .20 VarTarg, .20 Tactical, 5mm/35smc, Tight Bore 22 caliber, Chiappa M1-22, 20 hornet, 20 br, 20 PPC, and many others. These jags are proudly made in America, by Americans, using American Brass. The o-rings are able to conform to the inside of the bore in order to provide an airtight seal that literally forces dirt out of the barrel and onto the patch. Combined with our odorless cleaning Solvent and Bore Paste, this is simply the best cleaning jag made.
New TCS Manufacturingtm AR-10 Upper Receiver and Buffer Tube Cleaning Jag
For the first time ever, this revolutionary new tool allows you to easily clean and lubricate the upper receiver on AR-10 style rifles. This tool easily works with the interrupted cuts in the AR-10 receiver. The unique o-rings design of this jag holds onto the patch for the entire process, allowing you to scrub the action and remove burnt on built up gas residue. This tool is also excellent for applying lubricant to the action. This product has standard 5/16x27 threads that fit our new New TCS Manufacturingtm AR-15 Upper and Buffer Tube Cleaning Rod and all standard shotgun rods and adapters.

TCS Manufacturingtm .17 Caliber Jags Are now Available.
Our new 17 Caliber Jags fit 17 Mach 2, 17 HMR, 17 WSM, 17 Hornet, 17 Remington, 17 Bee and other .17 caliber rounds. These jags are proudly made in America, by Americans, using American Brass. The o-rings are able to conform to the inside of the bore in order to provide an airtight seal that literally forces dirt out of the barrel and onto the patch. Combined with our odorless cleaning Solvent and Bore Paste, this is simply the best cleaning jag made.
TCS Manufacturingtm .375 and 8mm/ 32 Caliber Jags Are now Available.
Our new 8mm /32 Caliber Rifle Cleaning Jag Fits Most 8mm Mauser, 8mm Rimmed, 32 Winchester, 8mm Mannlicher, 8mm Swedish, and 8mm Remington Magnum bores. These jags are proudly made in America, by Americans, using American Brass. The o-rings are able to conform to the inside of the bore in order to provide an airtight seal that literally forces dirt out of the barrel and onto the patch. Combined with our odorless cleaning Solvent and Bore Paste, this is simply the best cleaning jag made.

Our new .375 Caliber Rifle Cleaning Jag Fits Most 375 H&H, 375 Whelen, 378 Weatherby, 38-50, 38-55 Win, 38-56 Win, 38-70 Win, 38-72 Win, 38-90 Win, 9.5x47r, 9.5x73. These jags are proudly made in America, by Americans, using American Brass. The o-rings are able to conform to the inside of the bore in order to provide an airtight seal that literally forces dirt out of the barrel and onto the patch. Combined with our odorless cleaning Solvent and Bore Paste, this is simply the best cleaning jag made.

TCS Manufacturingtm Protect & Serve Gun Shield And Protect and Lubricate Scent Free Gun Oil

TCS Manufacturingtm Protect & Serve Gun Shield and TCS Manufacturingtm Protect and Lubricate Scent Free Gun Oil are designed for Hunters, Law Enforcement, Military, Shooting Enthusiasts, Gunsmiths and Armorers. These superior corrosion protectants, displace moisture when applied directly to metal surfaces using the convenient spray bottles. These products will not evaporate. They dry to a wax like surface that protects against corrosion in normal use, harsh weather and long term storage. Our Protect and Serve Gun Shield product is perfect for any application where scent management is not important. For example waterfowl hunting, storage, competition shooting etc. If scent is important, for example deer hunting, choose our Protect and Lubricate Scent Free Gun Oil for excellent protection without any game alerting odor
TCS Manufacturingtm Protect & Serve Gun Shield
TCS Manufacturingtm Protect and Lubricate Scent Free Gun Oil
TCS Manufacturingtm AR Style Bore Guide
The TCS Manufacturingtm AR Style bore guide properly aligns the cleaning jag and patch or brush with the bore. This tool prevents the rod from hitting the sides of the bore. It also prevents dirt, oil and solvent from falling into the action. This speeds up cleaning and prevents damage to the chamber and barrel.
TCS Manufacturingtm AR Style Gas Tube Cleaning Guide
The TCS Manufacturing Gas Tube Cleaning Guide properly aligns the Gas Tube Cleaner with the Gas Tube. It makes it easy to clean the gas tube,and prevents dirt, oil, and solvent from falling in the action, while speeding up cleaning and preventing damage to the gas tube.
New TCS Manufacturingtm AR-15, M4, M16 Upper Receiver and Buffer Tube Cleaning Jag


For the first time ever, this revolutionary new tool allows you to easily clean and lubricate the upper receiver and buffer tube on AR-15 style rifles. This tool easily works with the interrupted cuts in the AR-15 receiver. The unique o-rings design of this jag holds onto the patch for the entire process, allowing you to scrub the action and remove burnt on built up gas residue. This tool is also excellent for applying lubricant to the action. This jag, also bypasses the buffer tube retaining pin, and makes cleaning the buffer tube easy(Please note: that the buffer and buffer spring must be removed for this purpose). This product has standard 5/16x27 threads that fit our new New TCS Manufacturingtm AR-15 Upper and Buffer Tube Cleaning Rod (Coming Soon) and all standard shotgun rods and adaptors.

Now Announcing The Much Awaited New TCS Manufacturingtm16 Gauge Shotgun Jag


Our customers have loved the TCS Manufacturingtm line of cleaning jags. We have been inundated with requests for a 16 Gauge Jag, and it is finally finished. With all the great features of our other jags, the 16 Gauge Jag allows the die hard 16 Gauge fans to clean their guns with the same ease and speed associated with our other jags.
TCS Manufacturingtm Shotgun Magazine Tube Cleaning Jag


TCS Manufacturingtm Shotgun magazine tube patch jags are designed specifically for cleaning shotgun magazine tubes and is made with pride in the USA. These patch jags press the patch that has been treated with solvent or bore paste against the magazine tube to mechanically strip out debris that could inhibit your guns smooth feeding. These Jags are the only jag on the market designed to clean magazine tubes. “The proof is on the patch”. In addition to cleaning, our jags are also used for oiling the magazine for storage. Our shotgun jags fit all standard rods with 5/16x27 threads. In addition to this product, we suggest you purchase USP Bore Paste and Round TCS Manufacturingtm Patches for Shotguns. These patches are the perfect size for use with our jags and other patches may cause problems with tight fit. Square patches should not be used with our jags.
- Details
- Written by: admin
- Category: Uncategorised
- Hits: 1194
TCS Cleaning Video Instructions
TCS Manufacturing Cleaning System Instructions
- Unload the firearm and remove ammunition from the cleaning area.
- Double check to make sure the gun is unloaded
- If the gun has an easily removable barrel, remove the barrel from the gun.
- Secure the barrel of the gun in a padded vice or gun rest. If the barrel is not easily removed from the gun, simply secure the entire gun in a padded vice or rest.(Note if barrel is not easily removable, remove bolt from gun and install bore guide.)
- If heavy fouling exists, a bore brush may be used first to loosen tough deposits. At least one pass is recomended
- Screw the patch jag to a cleaning rod of the proper length and caliber.
- Saturate a Round Patch with TCS Mfg. Tactical Cleaning Solvent.
- Center the patch on the chamber end of the barrel or the end of the bore guide. The patch may be difficult to push through the bore if it is not centered properly.
- Use the jag attached to the cleaning rod to push the patch from the chamber to the muzzle of the gun. If the gun cannot be cleaned from the chamber end, it may be cleaned from the muzzle.
- Discard the used patch.
- Apply a thin layer of bore paste to a new patch using the included wooden spatula.
- Center the patch on the chamber end of the barrel or the end of the bore guide. The patch may be difficult to push through the bore if it is not centered properly.
- Use the jag attached to the cleaning rod to push the patch from the chamber to the muzzle of the gun. If the gun cannot be cleaned from the chamber end, it may be cleaned from the muzzle.
- It is safe to use a back and forth scrubbing motion inside the bore. This will make the cleaning faster and easier.
- After scrubbing the bore, push the patch out of the barrel through the muzzle.
- Remove the rod and the jag from the bore.
- Inspect the bore to make sure the fouling has been removed.
- Repeat the process with a fresh patch if any fouling remains.
- If heavy fouling remains after this step, a brush may be used to loosen deposits.
- Once the dirt has been removed, saturate a round cotton patch with TCS Mfg. Tactical Cleaning Solvent.
- Remove any residual bore paste by pushing the patch through the bore.
- Inspect the bore.
- If any bore paste remains in the bore, run another solvent saturated patch through the bore.
- If the firearm is to be stored, apply TCS Mfg. Ultimate Firearm Lubricant to a patch and press the patch through the barrel. This will leave behind a thin film that will protect your firearm for up to six months.
- After Removing Your Firearm from storage, push a dry patch through the bore to remove excess lubricant.
- Before loading any firearm, inspect the bore to ensure that there are no obstructions.
- If a bore is obstructed in any way, remover the obstruction.
Notes
- Note our Jags should be used with out round patches and a rotating rod to allow the jag to follow the rifling in bore. This allows the jag to remove fouling in the lands and grooves. We sell rods in Aluminum and Stainless Steel.
- FYI- Our patches are not proprietary- you can use another patch product that should be round and about .015" thick to work properly- Square patch's can jam in the barrel.
- Some .22 Cal. rifles & pistols have sub-diameter or small bores & the jag will not fit if using standard patch sizes. Smaller size patches are available on request.
- We recomend scrubbing back and forth with our Jag. The push the patch out through the muzzle if possible. Our porducts will also work with a direct one way process, exiting through the muzzle of the firearm.
- Details
- Written by: admin
- Category: Uncategorised
- Hits: 312
Location
3712 Main Street (Walworth Palmyra Rd) in Walworth New York. Our store is located on the South East Corner of 441 (Walworth-Marion Rd, Walworth Penfield Rd) and Walworth Palmyra Road (Main St), Next To Eastern Shores Associates Insurance Agency.
- From all points North: Take 350 South to 441 East. Turn left on 441 (Penfield-Walworth Rd) and turn right at the next traffic light (Main St. Walworth). The Custom shop is on the left side of the road
- From all points South: Take 350 N to 441 East. Turn right on 441 (Penfield-Walworth Rd) and turn right at the next traffic light (Main St Walworth). The Custom shop is on the left side of the road. (From Thruway, Take exit 43 off of Route 90 and head north to Route 31, turn left. Turn right on Walworth Palmyra Rd and which becomes Mainstreet Walworth after crossing Church Street. We are the second building for the corner on the right hand Side.)
- From all points West: Take 441 East to Main St Walworth. Turn right at traffic light. The Custom shop is on the left side of the road.
- From all points East: Take 441 West to Main street Walworth. Turn left at the light. The Custom shop is on the left side of the road
Please use the following link for a larger map View Larger Map
- Details
- Written by: admin
- Category: Uncategorised
- Hits: 563
Contact Us
Please write to: The Custom Shop, Box 410, Walworth, New York 14568.Ship to: The Custom Shop, 3712 Main St., Walworth NY 14568.
Call us: (315)986-1717 - Fax us: (315)986-4340
Our Email address is